Components
Engineered, built, and tested in-house at our Oak Ridge facility. Every system ships ready to run.
All components
22 products
SensorLiquid Helium Level Sensors
Superconducting LHe level sensors. Low helium consumption, proper venting in any orientation. Three diameters, sensing lengths from 1 to 200 cm.
- Outside diameter
- 4.76 / 6.35 / 9.52 mm
- Active sensing length
- 1 to 200 cm
- Overall length
- ASL + 2 cm (standard)
Current LeadDuty-Cycle Optimized Current Leads
DCO current leads for persistent-mode magnets. B100 consumes only 70 mL/hr LHe in static mode.
- Current range
- 50 – 200 A
- Cooling
- Helium vapor-cooled
- Operating mode
- Persistent-mode
SensorLiquid Nitrogen Level Sensors
Capacitance-based LN2 level sensors. Stainless steel, active lengths up to 200 cm, LM-510 compatible.
- Technology
- Capacitance-based
- Construction
- Stainless steel
- Active length
- Up to 200 cm
PlatformApplied Analysis Platform
Resistivity and Hall Effect Module (RHEM) for C-Mag magnet systems. AC/DC resistivity + Hall effect measurements, <1.8K to 325K.
- Operating temperature
- <1.8K to 325K
- Sample mount OD
- 25 mm
- Sample interconnects
- 12 wires
- Measurement types
- AC/DC, Hall effect
Current LeadHelium Monaxial Vapor-Cooled Current Leads
Vapor-cooled current leads for LHe environments. Ratings 50 A to 3000 A. Suits persistent and swept-field magnet operation.
- Current range
- 50 A to 3000 A
- Cooling
- Helium vapor
- Configurations
- 12 standard + custom
Transfer LineLiquid Helium Transfer Lines
All-welded stainless steel LHe transfer lines with vacuum-jacketed flexible piping. Standard 71.5″ flexible section; custom lengths on request.
- Construction
- Vacuum-jacketed steel
- Flexible section
- 71.5″
- Storage dewar leg
- 0.5″ O.D., 60″
- Stinger
- 0.375″ O.D., 32″
Transfer LineLiquid Helium Transfer Line: 6′ Flex Section
6′ flex section LHe transfer line. Superinsulated stainless steel with 71.5″ flexible section. Optional integrated LM-510-compatible level sensor.
- SKU
- LHe Line 6′ Flex
- Flexible section
- 71.5″
- Storage dewar leg
- 0.5″ O.D., 60″
- Stinger
- 0.375″ O.D., 32″
- Weight
- 20 lbs
- Dimensions
- 25 × 4 × 68 in
DewarLiquid Helium Dewars
Bucket-style LHe dewars for superconducting magnet systems. Top- or bottom-loading; aluminum/fiberglass or stainless steel construction.
- Construction
- Aluminum or stainless
- Loading style
- Top or bottom
- Options
- LN2, lambda, belly
Support AssemblyMagnet Support Assemblies
Magnet support assemblies with thermal baffles, vapor-cooled current leads, quench relief valve, and optional lambda plate for sub-4.2K operation.
- Current leads
- B-100, 100 A DCO
- Level sensor
- Superconducting LHe
- Cable length
- 15 ft cable
- Lambda plate option
- 2.2K magnet operation
AccessoryReplacement External LN2 Oscillator and Cable
Replacement external oscillator + 15 ft cable for LM-510 LN2 channel.
- SKU
- Ext-Osc
- Cable length
- 15 ft
- Compatibility
- LM-510 LN2 channel
- Weight
- 1 lb
- Dimensions
- 2 × 2 × 2 in
MonitorModel LM-510 Liquid Cryogen Monitor
Cryomagnetics' next-generation cryogen level monitor. Single or dual channel LHe/LN2, 240×400 TFT display, USB and Ethernet standard.
- Display
- 240 × 400 TFT LCD
- Interfaces
- USB, Ethernet
- Analog output
- 4-20mA, 0-10V/ch
PSUModel 4G Bipolar Power Supplies for Superconducting Magnets
Cryomagnetics' 4th-generation bipolar power supply for superconducting magnets. 4-quadrant true bipolar with USB, Ethernet, and IEEE-488.2 standard.
- Max Current Output
- ±100 – ±200 A
- Max Output Voltage
- ±10.00 V
SensorTemperature Sensors
Model PT-100 platinum resistance sensor for moderate-accuracy monitoring. Precision options (silicon diodes, ruthenium oxide) on request.
- Model
- PT-100
- Type
- Platinum resistance
- Application
- Moderate-accuracy
MagnetNbTi Solenoids
Multi-filamentary NbTi solenoid magnets in copper matrix, epoxy impregnated and fully quench protected. Standard 5T–9T designs with 20% field boost at 2.2K.
- Field range
- 5T–9T (4.2K)
- Bore sizes
- 1.00″ to 3.00″
- 2.2K boost
- +20% rated field
MagnetHigh Field Nb3Sn Solenoids
Nested NbTi/Nb3Sn coil solenoids from 10T to 19T with persistent switch, quench protection, and 2.2K operation options.
- Field range
- 10T–19T (4.2K)
- Bore sizes
- 1.50″ to 3.00″
- Operation
- Persistent, 45Ω switch
MagnetStandard Split Pair Magnets
Split-pair superconducting magnets providing radial port access for optical experiments, up to 11T at 4.2K with NbTi and Nb3Sn windings.
- Field range
- 3T–11T (4.2K)
- Split access
- 0.50″ to 5.00″
- Windings
- NbTi/Nb3Sn epoxy
MagnetMulti-axis Superconducting Vector Magnets
Two- and three-axis vector magnets with central solenoid and flanking split pairs, offering 360° planar or spherical rotation of the magnetic vector.
- Configurations
- 2-axis or 3-axis
- Standard bores
- 2.0″ and 2.5″
- Peak field
- up to 9T central
MagnetNuclear Demagnetization Magnets
High-field superconducting magnets with series-wound cancellation coils for ultra-low temperature research below 4mK and dilution refrigerator systems.
- NbTi range
- 9T @ 4.2K / 11T @ 2.2K
- Nb3Sn range
- 17T @ 4.2K/19T @ 2.2K
- Target temp
- <4mK sample
MagnetHigh Homogeneity Solenoids
Superconducting solenoids with 10 ppm homogeneity in trim coils and down to 0.1 ppm with second-order shim coils for NMR-quality experiments.
- Baseline homogeneity
- ≤100 ppm
- With trim coils
- 10 ppm
- With shims
- 1 or 0.1 ppm
MagnetHTS (High Temperature Superconductor)
Superconducting magnet systems built with BSCCO-2223 and YBCO high temperature superconducting tape for higher-field, larger-bore, and cryogen-free applications.
- Materials
- BSCCO-2223, YBCO
- Reference system
- 3.57T @ 37K, 3.5″ bore
- Application
- Gyrotron, custom OEM
MagnetUltra-Low Current Superconducting Magnet
Superconducting magnets designed with patented processes for ultra-low operating current — ideal for ADR applications and vacuum-installed instruments.
- Field examples
- 2.0T–5.0T (4.2K)
- Operating current
- as low as 1.5 A
- Application
- ADR, vacuum-installed
MagnetCustom and OEM Superconducting Magnet Systems
Custom-designed and build-to-print superconducting magnets, dewars, cryogenic accessories, and instrumentation for gyrotron, NMR, ICR, SQUID, VSM and other OEM systems.
- Field strength
- 19T sol., 10T split
- Model
- Custom/build-to-print
Ready to spec your next magnet system?
Tell us your field strength, bore size, and operating environment — our engineers will respond within one business day.